Aerodynamics Panel

1.Measurement of Forces and Moments on Generic Models in a Hypersonic Shock TunnelDr S SaravananIISc, Bangalore
2.Noise Supression in Supersonic NozzlesDr Rajarshi DasSchool of Mechanical Engineering, SASTRA Deemed to University, Tirumalaisamudram, Thanjavur
3.Establishment of Hypervelocity Expansion Tunnel Test Facility and Heat Flux Measurements Over Payload ConfigurationsProf Mohammed Ibrahim SIIT, Kanpur
4.Fluidic Thrust Vectoring of a Supersonic JetDr Arun Kumar PIIT, Kanpur
5.CFD Analysis of Ejection Seat System of an AircraftDr Sunil ChandelDIAT, Pune
6.Supersonic Jet Control by Tabs with Slanted PerforationProf Suresh Chandra KhandaRajalakshmi Engineering College, Chennai
7.Experimental Investigation of Base Pressure Field on Ducted Ramjet Intake ConfigurationDr M VijiCSIR-NAL, Bangalore
8.CFD Simulation of Ring Laser GyroscopeDr Natteri M SudharasanRajalakshmi Engineering College, Chennai
9.Influence of Mach Number on the Acoustic and Mixing Characteristics of a Strut-Cavity with Different Length to Depth RatiosDr NS VikramadityaCSIR-NAL, Bangalore
10.Investigation and Development of Physics Informed Neural Networks for Analysis of Complex Fluid Dynamics PhenomenaProf Arya Kumar BhattacharyaEcole Centrale School of Engineering, Mahindra University, Hyderabad
11.Estimation of Aerodynamic Heat Flux Over Martian Atmospheric Entry Configurations- A Numerical and Experimental InvestigationProf Ashok DeIIT, Kanpur
12.Experimental and Numerical Study on the Interaction of a Shock Tube Generated Blast Wave with Structures for Blast Attenuation and MitigationDr Abhishek Kundu & Prof Satya PrakashMNNIT, Allahabad & CMERI, Durgapur
13.Prediction of Aerodynamic Characteristics of Grid Fins at Subsonic, Transonic and Supersonic FlowsProf P TheerthamalaiACS College of Engineering, Bengaluru
14.Experimental Studies on Flow Separation and its Control in a Submerged IntakeDr C ManisankarCSIR-NAL, Bangalore

Aerospace Resource Panel

1.DRDO Scholarship Scheme for Under Graduate and Post Graduate Level Girls Students Related to Aerospace and Aeronautical Engineering, Space Engg., & Rocketry/Avionics/Aircraft Engg.: 2019 (Batch-1)Registrar( IIT Bombay, IIT Chennai, IIT Kanpur, IIT Kharagpur, DIAT Pune, PEC Chandigarh, IIES&T Kolkata, AVV Coimbatore)IIT Kanpur, IIT Bombay, IIT Madras, IIT Kharagpur, PEC Chandigarh, DIAT Pune, SASTRA Univ T.N., IIES Kolkata, BESU Kolkata, AVV, Coimbatore T.N.
2.DRDO Scholarship Scheme for Under Graduate and Post Graduate Level Girls Students Related to Aerospace and Aeronautical Engineering, Space Engg., & Rocketry/Avionics/Aircraft Engg.: 2020 (Batch-2)Registrar(IIT Bombay, IIT Madras, IIT Kanpur, IIT Guwahati, IIT Kharagpur, Birla Institute of Technology, Jharkhand, DIAT Pune, PEC Chandigarh, IIES&T Kolkata)IIT Kanpur, IIT Bombay, IIT Madras, IIT Kharagpur, PEC Chandigarh, DIAT Pune, SASTRA Univ T.N., IIES Kolkata, BESU Kolkata, AVV, Coimbatore T.N.
3.DRDO Scholarship Scheme for Under Graduate and Post Graduate Level Girls Students Related to Aerospace and Aeronautical Engineering, Space Engg., & Rocketry/Avionics/Aircraft Engg.: 2021 (Batch-III)Registrar(IIT Bombay, IIT Madras, IIT Kanpur, IIT Hyderabad, Indian Institute of Space Science & Tech., Thiruvananthapuram, Rashtreya Vidyalaya College of Engg., DIAT Pune, PEC Chandigarh, MNNIT, Allahabad, Amrita Vishwa Vidyapeetham, Tamilnadu, Nitte Meenakshi Institute of Technology, Karnataka, Visvesvaraya Technological University, Karnataka)Registrar (IIT Bombay, IIT Madras, IIT Kanpur, IIT Hyderabad, Indian Institute of Space Science & Tech., Thiruvananthapuram, Rashtreya Vidyalaya College of Engg., DIAT Pune, PEC Chandigarh, MNNIT, Allahabad, Amrita Vishwa Vidyapeetham, Tamilnadu, Nitte Meenakshi Institute of Technology, Visvesvaraya Technological University, Karnataka)

Materials & Manufacturing Panel

1.Experimental Investigations and Electro-Thermal Modeling of Electrode Wear Compensation in Micro Electric Discharge Machining (uEDM) of Shaped Holes on Super Alloys for Improving the Dimensional Accuracy and Functional Performance of Cooling Holes on Turbine Blades and VanesDr Basil KuriachenNIT, Calicut
2.Experimental Investigations on Nitriding of M50 Nil Steel for Aerospace Bearings ApplicationsProf B VenkateshVardhaman College of Engineering, Kacharam, Shamshabad, Rangareddy Dist.
3.Mechanical and Tribological Characterization of Al-Si Product Developed by Wire Are Additive ManufacturingDr ShivramanNIT, Warangal
4.Process Sequence and Metallurgical Assessment of Electron Beam Weld Joints of Martensitic Stainless Steel for Gear ApplicationsDr M VijayalakshmiMahatma Gandhi Institute of Technology (MGIT), Hyderabad
5.Partial Slip Fretting Studies on AL 7075-T6 Alloy at Sub-Zero TemperatureDr Vadivuchezhian KaliveeranNIT, Mangalore
6.Studies on Creep Behavior of Welded Gas Turbine Grade Su-718 Super AlloyDr K VenkateswarluCSIR-NAL, Bangalore
7.Development of Pd Diffused Transition Metal (Mo,Co,W) Based Chalcogenic Heterostructures Support on Carbon Nanostructures/Ni Form for Electrochemical Water SplittingDr KK ArunaRathinam Technical Campus, Pollachi Road, Eachanari, Coimbatore
8.Development of ZrB2-B4C Functionally Graded Materials for High-Temperature Aerospace ApplicationDr Siddhartha RoyIIT, Kharagpur
9.Development of Novel B and C Modified Fillers for the Gas Tungsten Arc Welding of Ti AlloysDr T Mahesh KumarNIT, Warangal
10.Understanding the Role of Hydrogen in Titanium Alloy WeldmentsDr N Kishore BabuNIT, Warangal
11.Strain Partitioning and Damage Mechanism during Thermo-Mechanical Fatigue in a Ni-base CM247LC SuperalloyProf Sumantra MandalIIT, Kharagpur
12.Development of Screw Extruder Based Additive Manufacturing System for Developing Ceramic Core to be used in Turbine Blade CastingDr Sudip Kumar SamantaCSIR-Central Mechanical Engineering Research Institute, Durgapur
13.Numerical and Experimental Investigations of Additively Manufactured Aircraft Wing Components Using Carbon Fiber Reinforced Polymer Composite MaterialDr DG ThakurDIAT, Pune
14.Development of Shape Memory Oxide Thin-Films for Aerospace Applications: Understanding the Phase-Switching Behavior, Related Defect Formation and Shape Recovery ProcessProf Kaustuv MannaIIT, Delhi
15.Development of Doped Barium Zirconate Titanate (BZT) Based Piezoelectric Ceramics for Acoustic Emission Sensor ApplicationsDr Anoop Kumar ShuklaAmity Institute of Applied Sciences, Amity University, U.P.
16.Development of Self-Biased Magnetic Materials for Low-Loss Bias-Field-Free Passive Microwave DevicesProf Arabinda HaldarIIT, Hyderabad
17.Development of Perovskite Oxides SrCeO3 and Sr2CeO4 as High-Temperature Thermal Barrier Coating (TBC) Material for Aerospace ApplicationProf (Mrs) Shail UpadhyayIIT Banaras Hindu University (BHU), Varanasi
18.Development of a Stable Machinability Investigation and Thermal Modelling of Aerospace MaterialProf Chinmaya Prasad MohantyVIT University, Vellore
19.Development of Multiferroic Tapes for Sensing and Energy Harvesting ApplicationsDr N Venkata PrasadUniversity College of Science, Osmania University, Hyderabad
20.Process and Hybrid Tool Design for Higher Productivity in FSW Butt-Joints of Thick A1-Alloy 2219 PlatesProf Jeevan JaidiBITS, Pilani, Hyderabad
21.Extensive Evaluation of Mechanical Properties such as Tensile, HCF and LCF (at Room Temperature & at High Temperature) of Important Superalloys (CMSX-4 or CM-247) and Microstructure-Mechanical Properties CorrelationProf Sushil MishraIIT, Bombay
22.Design and Development of a Reconfigurable Electrochemical Machining Centre for Rocket ShellsProf Janakarajan RamkumarIIT, Kanpur
23.Heteroatoms and Positive Charge Bearing Carbon Skin Comprising Graphene for Energy StorageDr K KrishnamoorthyCSIR-National Chemical Laboratory (NCL), Pune
24.Development of Long Lasting Polyurethane Nanocomposite Films and Life Time Estimation using Finite Element Analysis with respect to Aerostat ApplicationProf Santanu ChattopadhyayIIT, Kharagpur
25.Mechanical and Microstructural Behavior of Laser Based Directed Energy Deposited and Wire Arc Additive Manufactured Ti-6A1-4V ComponentsDr Ajay KumarIIT, Tirupati and Sardar Vallabhabhai National Institute of Technology (SVNIT), Surat
26.Creep and Fatigue of Selective Laser Melted Ti-6242 AlloyProf Srikant GollapudiIIT, Bhubaneswar
27.Development of Ultra-Fine-Grained Thin Sheets of Beta Ti Alloys Through Constrained Groove Pressing and Cryo-Rolling ProcessesDr Suresh NeelakantanIIT, Delhi
28.Feasibility Study on the Single Crystal Growth of the CMSX-4 Alloy Through the Direct Energy Deposition ProcessProf Abhik Narayan ChoudhuryIISc, Bangalore
29.MEMS Based Tunable Film Based Bulk Acoustic Resonators with Magnetostrictive/ Piezoelectric Bilayer Composite Thin FilmsProf Jitendra SinghCSIR- Central Electronics Engineering Research Institute (CEERI), Pilani
30.Microwave Shielding of Quaternary Composite for Aerospace IndustryDr Paramjit Kour & Prof Manoranjan KarBIT, Mesra, Ranchi & IIT, Patna
31.Repair of High Value Al-alloys Using Cold Spray TechnologyDr Ayan BhowmikIIT, Delhi
32.Fabrication of High Temperature Piezo Pressure Sensor for Aeronautical ApplicationDr Rajat Banerjee & Prof Shiv Govind SinghCSIR-Central Glass & Ceramic Research Institute, Jadavpur University, Kolkata & IIT, Hyderabad
33.An Extensive Investigation of Microstructure Evolution during Heat Treatments and Hot Forging of High Strength β-Ti-5553 AlloyProf Shanta ChakrabartyKIIT Deemed to be University, Bhubaneswar, Odisha
34.Design and Investigation of Nanostructured TBC Coatings (CoCrA1Y/Ta/Hf as a Bond Coatings and 8% y2O3-ZrO2, Top Ceremic Coatings) on Superni-718 Substrate in Adverse Environment at 800-1000C for Aero Space EnginesProf Atikur RahmanNIT, Srinagar
35.Process Development for Refining Commercial Magnesium Metal Through Vacuum Distaillation in Semi-Continuous Mode at 5-6kg ScaleDr Krishna KumarCSIR-National Metallurgical Laboratory, Jamshedpur
36.Development of Incremental Forming Process Incorporating Novel Strategies for Titanium Alloy Based Aerospace ApplicationsProf Anupam AgarwalIIT, Ropar
37.Optimization of Post-Investment Cast HIPping Treatment of Aerospace Grade Ti-6AI-4V Alloy for Improvement of Fatigue LifeProf Kumud Kant MehtaNIT, Rourkela
38.Development of Aerospace Components Through Electromagnetic WeldingDr Meraj AhmedCSIR-Advance Materials and Processes Research Institute (AMPRI), Bhopal
39.Alleviation of Black Skin Formation on Anodizing of Additive Manufactured AISi10Mg Alloy Parts and Enhancement of Corrosion PerformanceProf P ChandramohanSri Ramakrishna Engineering College, Vattamalaipalayam, Coimbatore
40.Evaluation of Mechanical Properties such as Tensile, Creep, LCF, KIC, FCG, CCG Values if an Important Cast Ni Based Superalloy (BZL-12Y)Prof Sujoy Kumar Kar & Dr S SivaprasadIIT, Kharagpur & CSIR- NML Jamshedpur
41.Optimization of Friction Stir Welding (FSW) Process Parameters for Dissimilar Aluminum Alloy (2024-T3/7075-T6) Lap JointsDr M Suresh KumarCSIR-NAL, Bangalore

High Temperature Materials Initiative with Focus on Gas Turbine Materials (GTMAP) under
Material & Manufactureing Panel

1Understanding Room Temperature Dwell Fatigue Debit in Titanium Alloys with 3D Microtexture Characterization (GTMAP)Prof. Satyam SuwasIISc, Bangalore
2.       Linear Friction Welding of Components for Gas Turbine (GTMAP)Prof Satish V KailasIISc, Bangalore
3.  Design and Development of Bypass Duct Casing Assembly for Aero Engine Applications using High Temperature Composites (GTMAP)Dr Ramesh SundaramCSIR-NAL, Bangalore
4. Investigations into Ternary Interdiffusion in Bond Coat Systems of Я(Ni, Pt) Al and (Ni, Ru) Al (GTMAP)Prof Kaustubh N KulkarniIIT, Kanpur
5.       Laser Shock Peening of Inconel-718 Aero Engine Alloys (GTMAP)Prof P Prem KiranSchool of Physics, University of Hyderabad, Gachibowli, Hyderabad
6. Accelerated Property Prediction of Titanium and Nickel Based Superalloys and Structural Safety Using Machine Learning (GTMAP)Prof Abhishek Kumar SinghIISc, Bangalore
7Plasma Spraying of Rare-Earth Niobates Powder and Controlling its Stoichiometry and Porosity for the Advanced Thermal Barrier Coating Applications (GTMAP)Dr Anup Kumar KeshriIIT, Patna
8Through-Process Modeling of DS/SC Superalloy Turbine Blades Processed Using Modified Bridgman Route-Validation with CMSX-4 Alloy (GTMAP)Prof Abhik Narayan Choudhury & Prof Saswata Bhattacharya & Prof Gandham PhanikumarIISc, Bangalore & IIT, Hyderabad & IIT, Madras

Propulsion Panel

1Development of a Can-type GT Combustor Operating in Flameless Combustion ModeProf Sudarshan KumarIIT, Bombay & IIT, Kharagpur
2Development of Catalyst System for Stable Combustion of HAN Green PropellantsDr Shelly BiswasBIT, Mesra, Ranchi
3Sensitizing Fuel Oxidizer-Diluents Mixtures for Detonation Cycle EnginesDr Ajay V SinghIIT, Kanpur
4Investigation of T--Vaporizer Atomization Performance- Effect of Internal GeometryDr Surya Prakash RIIT, Dharwad
5Experimental Studies on Wankel Engine Performance at Enhanced Compression RatiosProf AJ Steve MithranCSIR-NAL, Bangalore
6Measurement of Species Concentration and Temperature Using Coherent Anti-Stokes Ramam Spectroscopy (CARS) in CombustorsProf Sathesh MariappanIIT, Kanpur
7Development and Implementation of Non-Gray Radiative Model for Combustion ApplicationsDr Pradeep KumarIIT, Mandi
8Blowoff Dynamics of Afterburner FlameDr Anubhav SinhaIIT (BHU), Varanasi
9Development of a Fast Response TDLAS Temperature Sensor for High Temperature ApplicationsProf Rajesh SadanandanIndian Institute of Space Science and Technology (IIST), Thiruvananthapuram
10Numerical Studies on Start/Unstart Behavior of Scramjet IntakeDr P SenthilkumarVIT, Vellore
11Design Optimization of Turbine Nozzle Guide Vane Three-Dimensional AirfoilsDr Ravi K BompellyMahindra University, Hyderabad
12Experimental Determination of Afterburner Liner ImpedanceDr Aditya SaurabhIIT, Kanpur
13Mixing and Combustion Enhancement in Cavity Based Scramjet CombustorProf Vinod NarayananIIT, Gandhinagar
14Powertrain for All-Electric HANSA NG- Technology DemonstrationDr R Sudharshan KaarthikIndian Institute of Space Science and Technology (IIST), Thiruvananthapuram

Structures Panel

1Unidirectional Tape Pre-preg Based Carbon/ Epoxy Short Fiber Composites: Development, Mechanical Characterization, Stiffness and Strength PredictionsDr PM MohiteIIT, Kanpur
2Numerical Investigations of Nonlinear Aeroelastic Response of a Deployable Supersonic Missile FinProf Abhilash J ChandyIIT, Bombay
3Aero-Thermo-Elastic Analysis of Hypersonic VehicleProf Mohammed Rabius SunnyIIT, Kharagpur
4Bayesian Model Updating Approach for Systematic Damage DetectionDr Sahil BansalIIT, Delhi
5Crack Growth Studies in Multi-Angular Composite Specimens under Fatigue LoadingMr Viswarupachari CHCSIR-NAL Bangalore & IIT, Madras
6Multiscale Modeling of Failure of CompositesProf Harpreet SinghIIT, Goa & IIT, Delhi
7Development of a Localized Gradient Damage Based Extended-FE Model for Fatigue Analysis of Aircraft ComponentsDr Sachin KumarIIT, Ropar
8Lightweigth Multi-functionally Graded Meta-Structure of Lattice Infilled Annular Tubes for Enhanced Energy AbsorptionDr Vinod Kushvaha & Dr Tanmoy MukhopadhyayIIT, Jammu & IIT, Kanpur
9Shimmy Vibration Analysis of UAV with Landing GearsDr S SivakumarSRM Institute of Science and Technology, SRM Nagar, Kattankulathur Kancheepuram District
10Design of Shock Mounts for Typical LRU of Aircraft Using Conventional Shock Mounts and Magneto Rheological Shock MountsDr Hemantha KumarNITK Surathkal, Mangalore
11Nonlocal Approach for Modelling Delamination in CompositesDr Amirtham RajagopalIIT, Hyderabad
12Fully Acoustics Testing of Low Velocity Impact Damage in Composite Plate Using the Concept of Local Defect ResonanceDr Tanmoy BoseNIT, Rourkela
13Digital Twin Development Employing Bayesian Filters With Sub-Structured Predictor Models for Aerospace ApplicationDr Subhamoy SenIIT, Mandi
14Dynamics and stability of hose-drogue system used in aerial refuellingProf Ishan SharmaIIT, Kanpur
15Thermo-Mechanical Fatigue Analyses of Carbon Fibre Reinforced Polymer Composites for Aerospace Applications: Experimental and Modelling ApproachDr Himanshu PathakIIT, Mandi
16An Experimental and Numerical Study of Environmental Degradation in Adhesive JointsProf Akhilendra SinghIIT, Patna
17A Rapid Method to Manufacture Carbon Nanotubes on Recycled Carbon Fibres to Enhance Mechanical Performance Composite ThereofDr Sunny ZafarIIT, Mandi
18Rate-Dependent Constitutive Modeling of Shape Memory Alloy(SMA) Composite for Ballistic ResponseDr Krishnendu HaldarIIT, Bombay
19Experimental and Numerical Investigations on the Failures of Metallic and Composite Structures to Hail Ice ImpactProf K RamajeyathilagamSINCRASH Centre, Hindustan Institute of Technology and Science, Rajiv Gandhi Salai (OMR), Padur, Chennai
20Damage Monitoring of Composite Structures Using Multimode In-situ Piezoelectric Sensor NetworkDr Soma DuttaCSIR-NAL, Bangalore
21Effect of Sequence of Loading on the Fatigue Life of GFRP CompositesProf Indra Vir SinghIIT, Roorkee
22Modeling and Analysis of Cracked Porous FG and FG Sandwich Aircraft Panels using XIGADr Gagandeep BhardwajThapar Institute of Engineering and Technology, Patiala
23Simultaneous Tuning of I, II, and III Mode Frequency of FEA Model With Experimentally Measured FrequenciesProf SH UpadhyayIIT, Roorkee
24Design of Multi-Stable Variable Stiffness Composite Shells for Morphing ApplicationsDr Tanish DeyIndian Institute of Technology (ISM), Dhanbad
25Low Impact Damage Detection in Composite Plate using Modal Data and Shearlet AnalysisDr R PrakashNIT, Tiruchirappalli

Systems/Systems Engineering Panel

1Studies and Investigations on Improvement of Effective Communication in Aircraft Mobile Adhoc Networks (AMANET) using Neighbour Based Collaboration Technique for Military AircraftsDr T MenakadeviAdhiyamaan College of Engineering, Hosur, Tamilnadu
2Implementation of Embedded Optic Flow Sensor for Unmanned Autonomous Vehicle ApplicationsDr Alluri SreenivasGITAM University, Visakhapatnam
3Automated Landing of Rotorcraft on Moving PlatformProf Ranjith MohanIIT, Madras
4Rolling Element Bearing Health Assessment Algorithm Development using Online Oil Debris Monitoring System DataDr Sadanand S KulkarniCSIR-NAL, Bangalore
5Design of All-Weather Foreign Object Detection System on Runways (Visual and MM Wave Imaging)Dr Sarika JainAmity Institute of Information Technology, Amity University, U.P.
6Safe Vision Aided Landing Flight Control SystemProf Arnab MaityIIT, Bombay
7Design of a Streamlined Ablatable Radome for Airborne ApplicationsDr Hrishikesh S SonalikarBITS, Pilani, Goa Campus
8Decision Fusion Technique for a Multisensorial Context for Ensuring Applications in Fault Diagnostics and Decision Support SystemsProf RK AmitIIT, Madras
9Multi-Vehicular Cooperative Pursuit and Evasion Guidance Strategies: Multi Agent PerspectiveDr Shashi Ranjan KumarIIT, Bombay
10Single Sided Matrix Converter Fed Brushless DC Motor for Energy ConservationDr R AnandAmrita School of Engineering, Amrita Vishwa Vidyapeetham, Bengaluru
11Design, Development and Rotor Dynamic Analysis of Optimized Stack-Structured Permanent Magnet Bearings (OSPMB)Dr Siddappa I BekinalManipal Institute of Technology, Manipal, Dist. Udupi
12Visual Inertial Odometry for Navigation of Unmanned Vehicle in GPS Denied EnvironmentDr Shashi PoddarCSIR- CSIO (Central Scientific Instruments Organisation), Chandigarh
13Low RCS Electronic Warfare Antenna for Stealth PlatformDr Hema SinghCSIR-NAL, Bangalore
14Information Display Design and Human Systems Integration for Advance Fighter AircraftsDr Vivek KantIIT, Kanpur
15The Research for Energy Saving Systems- Development of All Electric/More Electric Environmental Control System for Fighter AircraftProf Chennu RanganayakuluBITS, Pilani, Rajasthan
16Design and Implementation of Image-Based Target Identification Using Open Core SoC on FPGAProf Prashant V JoshiREVA University, Yelahanka, Bengaluru
17Design Development of Cost Effective and Ultra-Safe Superior Aqueous-Zn ion Battery for Military AviationDr Pravin S WalkeUniversity of Mumbai
18Bifurcation Analysis and Reconfigurable Control Design for Autonomous Maneuvering with an Asymmetric AircraftDr Bijoy Krishna MukherjeeBITS, Pilani
19Design and Development of Electromagnetic Coil System to Launch Net Hiding Decoy for Drone CatchingDr Sandhya ThotakuraGITAM (Gandhi Institute of Technology and Management), Visakhapatnam
20Design and Analysis of Multi-Sensor Image Fusion Based Object Detection and Classifications MethodsDr Jeevan KMGITAM School of Technology Bengaluru

Unmanned Aero System Panel

1Design and Performance Analysis of Robust Algorithm for Surveillance and Object Reconnaissance Using Enhanced Aerial ImageryDr Archana NandibewoorSDM College of Engineering & Technology, Dhawalgiri, Dharwad
2Power Management System for Energy-Efficient Hybrid Power Source for UAVProf Sugesh MSSreepathy Institute of Management and Technology, Koottanad, Plalakkad Dt. Kerala
3An Experimental Exploration of Efficient Kinematics for Next Generation Flapping Wing Unmanned Aerial Vehicles (FWUAVs)Prof Amit GuptaIIT, Delhi
4Leader Follower Autonomous Flight Control for UAV SwarmProf S SelviDr Sivanthi Aditanar College of Engineering, Tamilnadu
5Shape Memory Alloy Actuated Lightweight Auxetic Hinge Coupons for Chordwise Wing Folding of UAVs and Other Deployment PurposesDr Sahil KalraIIT, Jammu
6Active Flutter Suppression of Composite Wing Embedded with Shape Memory Alloys (SMAs)Prof Rammohan BhanumurthyDayananda Sagar University, Bengaluru
7Trajectory Planning and Tracking Control for Automatic Landing of Unmanned Combat Aerial VehicleProf C RamprasadhSastra Deemed to be University, Tirumalaisamudram
8Development of Functionally-Graded Hybrid Fiber-Reinforced Polymer Composites for High Strain Rate and Elevated Temperature Aeronautical ApplicationsProf Vasant Matsagar & Prof Shamsher Bahadur SinghIIT, Delhi & BITS, Pilani
9Development of an Reinforcement Learning Based Tracking Algorithm for a Mobile Tracker to Strategically Track Intelligently Guided Mobile TargetDr Chandrajit ChoudhuryNIT, Silchar
10Development of Self-Healing FRP Composites Using Novel 3D Printing Technology and Their Performance Analysis for Unmanned Aerial VehiclesDr PS Shivakumar GoudaSDM College of Engineering & Technology, Dhawalgiri, Dharwad
11A Comprehensive Numerical Electromagnetics Solver Development for Strategic Applications in the Context of Unmanned Aircraft VehiclesProf Venkat Prasad PadhyVIT Bhopal University, Bhopal, MP.
12Performance Improvement of Micro Propulsion System for Unmanned Aerial Vehicle (UAV)Dr Krishnakumar PKumaraguru Centre for Industrial Research & Innovation, Kumaraguru College of Technology, Coimbatore
Back to Top